Domains and TLS

Geass publishes two kinds of things on your domain: the dashboard, and the services you deploy. You set a platform domain once, under Settings → Domain. Services then get hostnames of their own. This page covers setting the platform domain, how Geass checks it, Cloudflare-managed DNS, custom domains on a service, and how Geass gets HTTPS certificates, including the contact email it needs.

Three ways to publish

Pick one when you set the platform domain.

Setup	DNS	Where TLS ends	What you do yourself
Manual DNS	You create an `A` record at your DNS provider.	On your server, in Traefik, with a certificate from cert-manager.	Create the DNS record. Open ports 80 and 443. Give the cluster a Let’s Encrypt email.
Cloudflare, DNS to cluster (DNS to cluster (proxied A record))	Geass creates a proxied `A` record for the dashboard in your Cloudflare zone.	At Cloudflare for visitors. Between Cloudflare and your server it depends on your zone’s SSL/TLS mode, and the server’s own certificate comes from cert-manager.	Connect Cloudflare. Open ports 80 and 443. Give the cluster a Let’s Encrypt email. Records for service hostnames are yours to create.
Cloudflare Tunnel (Cloudflare Tunnel)	Geass creates proxied `CNAME` records for the dashboard and every service hostname.	At Cloudflare. A `cloudflared` pod in the cluster connects out to Cloudflare.	Connect Cloudflare. No inbound ports, no issuer.

The installer does not open ports 80 or 443 on your server or on your provider’s firewall. Let’s Encrypt validates a hostname over port 80, and visitors use 443. See Install and Ports and firewall.

Before you start

A domain you control, and an admin login to the dashboard.
The public IP address of the server that runs Geass (this page uses 203.0.113.10).
For the manual setup or Cloudflare DNS to cluster: ports 80 and 443 reachable on that server. K3s runs Traefik, which listens on them. Also a real email address for the Let’s Encrypt account, given to the installer as GEASS_ACME_EMAIL or set on the cluster later (see HTTPS and certificates). Let’s Encrypt refuses placeholder domains such as example.com.
For Cloudflare: a connection, set up as described in Connect Cloudflare.

Set the platform domain

The platform domain (the Root domain) is your main domain, for example example.com. The dashboard goes on geass.example.com by default, and services that get default hostnames use it too (see Default hostnames).

Until the dashboard domain is set and verified, admins see a banner: “Dashboard domain. Set a public host so Geass can verify HTTPS and finish platform setup.” with Configure domain. It shows above the pages outside a project (Projects, Templates, Usage and Settings, except Settings → Domain), not inside a project. It disappears once the domain is verified.

Without Cloudflare

Create a DNS record geass.example.com → 203.0.113.10 (type A) at your DNS provider.
Check that the cluster has a Let’s Encrypt email, so Geass creates the letsencrypt-prod issuer (below).
Open Settings → Domain. In Manual domain enter the Root domain (example.com, apex only) and optionally a Subdomain (default geass). The page previews the Dashboard URL.
Choose Save dashboard domain.

If Cloudflare is connected, Manual domain is behind Use a different domain without Cloudflare.

With Cloudflare

Connect Cloudflare under Settings → Connectors → Cloudflare.
Open Settings → Domain. The page shows Cloudflare connected, the Zone, and the Dashboard URL.
Choose Use https://geass.example.com. This saves the domain using the current Publish via choice.
To change the zone, the subdomain or Publish via, open Customize zone or subdomain, set them, and choose Save dashboard domain. Publish via is DNS to cluster (proxied A record) or Cloudflare Tunnel.

If Geass cannot read the zone name from Cloudflare, the page asks for the Zone apex domain.

The fields

Field	Meaning	Default
Root domain / Zone apex domain	Your main domain. Geass lowercases it and drops `https://`, any path, a trailing dot and a leading `geass.`. It needs at least one dot.	None
Subdomain	The host label for the dashboard. Lowercase letters, digits and hyphens, up to 63 characters.	`geass`
Cloudflare zone	The zone Geass writes records in. Appears when the token can read zones.	The connected zone
Publish via	How Cloudflare reaches the dashboard.	DNS to cluster (proxied A record)

Saving stores the root domain, the dashboard URL https://<subdomain>.<root domain> and the publish mode on the platform configuration. Saving a different domain starts verification again.

Through the API, with a workspace admin token:

curl -X POST https://geass.example.com/api/settings/domain/save \
  -H "Authorization: Bearer $GEASS_TOKEN" -H "Accept: application/json" \
  -d domain=example.com -d subdomain=geass -d exposure=ingress

exposure is ingress or cloudflare-tunnel. For the tunnel, Cloudflare must be connected (or you must send tunnelCNAMETarget). Add cloudflareZoneId to choose a zone.

How Geass verifies the domain

After you save, the operator works through these steps and repeats them every 5 seconds:

Create the dashboard Ingress (not in tunnel mode): geass-dashboard in geass-system, class traefik, entry point websecure, TLS secret geass-dashboard-tls, and the annotation cert-manager.io/cluster-issuer: letsencrypt-prod. It routes your hostname to the dashboard Service on port 8085.
Point DNS.
- With Cloudflare: create or update a proxied A record for the dashboard host with the server’s IP.
- Without Cloudflare: look the host up and compare it with the server’s public IP. Geass finds that IP from a node’s external address, or a public node address, or, failing both, by asking api.ipify.org and ifconfig.me from the operator.
- In tunnel mode: it checks the host’s CNAME (when the HTTPS check below does not already succeed).
Probe over HTTPS. Geass requests https://geass.example.com/geass-probe, a public path that answers {"ok":true}. The request verifies the certificate against the operator’s normal trusted certificate authorities, so a self-signed or default Traefik certificate fails it.

When the probe answers, the domain is verified, and Geass saves Verified on the platform configuration. After 15 minutes without success the status becomes VerificationTimedOut, and Geass keeps trying every 5 minutes, so a late fix still turns it green. Changing the domain resets the clock.

Nothing in the dashboard shows the progress, so read it from the platform configuration:

kubectl -n geass-system get geassplatformconfig platform \
  -o jsonpath='{range .status.conditions[*]}{.type}{"\t"}{.status}{"\t"}{.reason}{"\t"}{.message}{"\n"}{end}'

The DashboardDomainReady condition has these reasons:

Reason	Message	Meaning
`NoDomain`	Dashboard domain is not configured	You have not saved a domain.
`PendingDNS`	DNS not detected yet, or Could not create dashboard DNS record in Cloudflare, or could not determine this server’s public IP	The record is missing or points elsewhere.
`PendingHTTPS`	Dashboard HTTPS endpoint is not reachable yet, followed in parentheses by what is wrong with the issuer, when something is (not in tunnel mode)	DNS is right, but `https://…/geass-probe` fails: no certificate, a closed port, or the wrong SSL mode.
`ZoneRequired`	Select a Cloudflare zone in domain settings (multiple zones match this token)	Choose a zone in Customize zone or subdomain.
`PendingTunnel`	Cloudflare tunnel ID is not configured	Tunnel mode without a tunnel yet.
`Error`	Cloudflare credentials are unavailable, Cloudflare credentials are incomplete, or dashboard service was not found	Reconnect Cloudflare, or check the dashboard Service.
`VerificationTimedOut`	Not verified after 15 minutes: followed by the last message	Fix the cause. Geass retries every 5 minutes.
`Verified`	DNS is configured for the dashboard domain, or Dashboard HTTPS endpoint is reachable	Done.

To check right now instead of waiting, call the verify endpoint. It looks the host up, probes the public URL and, when the probe works, records Verified:

curl -X POST https://geass.example.com/api/settings/domain/verify \
  -H "Authorization: Bearer $GEASS_TOKEN" -H "Accept: application/json"
# {"message":"…","ok":false,"state":"pending"}

Its messages are DNS lookup failed for <host>, could not reach the dashboard URL, <url> did not return a successful Geass probe response, and, when the dashboard answers on the server but not at the public address, Dashboard responds locally, but the public URL could not be reached. Check ingress, TLS, and DNS routing. Except for the DNS lookup message, and unless the dashboard is published through a tunnel, each of these ends with the issuer’s problem in parentheses when the cluster reports one, for example (No ACME contact email is configured, so the letsencrypt-prod ClusterIssuer was not created …).

Everything that needs a public dashboard address waits for verification. Registering the GitHub App is the main one; see Connect GitHub.

HTTPS and certificates

Geass gets certificates from Let’s Encrypt through cert-manager. What it does:

It installs cert-manager (the geass-cert-manager Helm chart, cert-manager namespace) on every cluster, unless you turn the add-on off with spec.addons.certManager.enabled: false on the GeassCluster.
Every Ingress that should have a certificate carries cert-manager.io/cluster-issuer: letsencrypt-prod and a TLS secret name: geass-dashboard-tls for the dashboard, and <service ID>-tls for a service with HTTPS on.
When the cluster has an ACME email, it creates the letsencrypt-prod ClusterIssuer. The email is spec.addons.certManager.acmeEmail on the GeassCluster. The installer sets it from GEASS_ACME_EMAIL, and you can set or change it later. Geass creates the issuer as soon as cert-manager reports ready, and looks again every 30 seconds until then.

What the issuer is: ACME against Let’s Encrypt’s production directory (https://acme-v02.api.letsencrypt.org/directory), solving the HTTP-01 challenge through the traefik ingress class, with the account key in the Secret letsencrypt-prod-account-key that cert-manager creates in its own namespace. It carries the labels geass.dev/managed-by: geass and geass.dev/cluster: <GeassCluster name>, which is how Geass tells it from an issuer you made yourself.

Set or change the email on a running cluster, including one installed without it. Geass creates or updates the issuer within seconds:

sudo k3s kubectl -n geass-system patch geasscluster default --type merge \
  -p '{"spec":{"addons":{"certManager":{"acmeEmail":"[email protected]"}}}}'

Use a real address. Let’s Encrypt keeps it as the contact for your account and refuses placeholder domains such as example.com. See Install for passing it to the installer.

Geass looks after the issuer like this:

If you edit the fields it sets (the email, the server, the account key name or the solver), or delete the issuer, it puts them back.
An issuer named letsencrypt-prod that Geass did not create is never changed. Once cert-manager reports it ready, Geass reports it as ExternallyManaged. Use this to keep your own issuer, for example a DNS-01 wildcard one.
Removing the email later does not delete the issuer Geass made, because certificates issued through it still renew through it.
If another GeassCluster owns the issuer, it is left alone (ManagedByAnotherCluster).
With the cert-manager add-on off, Geass manages no issuer.

What you still do yourself:

DNS. Let’s Encrypt validates a hostname by requesting it over HTTP, so the name must already point at your server. Create the record before you turn HTTPS on, because Let’s Encrypt limits repeated failed validations.
Ports. Open 80 and 443 to the server, in your provider’s firewall and on the host. Geass does not open them, and it adds no HTTP to HTTPS redirect.
A working email. If Let’s Encrypt refuses it, the issuer never becomes ready.

Check the issuer and the certificate

The GeassCluster carries a ClusterIssuerReady condition. It is informational: a cluster without an issuer is still Ready and runs workloads.

sudo k3s kubectl -n geass-system get geasscluster default \
  -o jsonpath='{.status.conditions[?(@.type=="ClusterIssuerReady")].reason}{": "}{.status.conditions[?(@.type=="ClusterIssuerReady")].message}{"\n"}'
sudo k3s kubectl get clusterissuer letsencrypt-prod

IssuerReady (status True) means the issuer exists and cert-manager registered the ACME account. The common other reasons are ACMEEmailMissing (no email, so no issuer), WaitingForCertManager, IssuerRegistering and IssuerNotReady (cert-manager’s own reason follows, usually Let’s Encrypt refusing the email). The full list is in Install.

Then follow one certificate. cert-manager creates a Certificate named after the TLS secret the first time it sees the Ingress:

sudo k3s kubectl get certificate -A
sudo k3s kubectl -n geass-system describe certificate geass-dashboard-tls
sudo k3s kubectl -n proj-1a2b3c4d-production describe certificate amber-fern-tls
sudo k3s kubectl get order,challenge -A

A certificate that is Ready: True is issued. One that stays False is waiting on its Order and Challenge, which name the reason: usually DNS that does not point at the server, or port 80 closed.

Behavior to know:

An Ingress with HTTPS off serves plain HTTP only, on Traefik’s web entry point. An Ingress with HTTPS on serves HTTPS only, on websecure. Geass adds no redirect, so http:// to a service with HTTPS on does not answer.
Until the certificate exists, Traefik answers with its own default certificate, and browsers warn.
With a Cloudflare Tunnel, traffic does not pass through Traefik, so neither the issuer nor HTTPS matters: Cloudflare presents the certificate for the hostname. A cluster without an email still shows ACMEEmailMissing, which you can ignore in this mode.
With DNS to cluster, Cloudflare presents its certificate to visitors, and your server presents its own to Cloudflare. Geass does not change your zone’s SSL/TLS encryption mode. The dashboard’s Ingress only listens on HTTPS, so a mode that connects to your server over plain HTTP cannot reach it. Cloudflare’s proxy is also in the path of Let’s Encrypt’s request, so if a certificate is never issued, check your zone’s SSL/TLS mode and any redirect rules.

Cloudflare-managed DNS

Connecting Cloudflare lets Geass manage DNS in one zone. What it creates depends on Publish via:

Publish via	In Cloudflare	In the cluster
DNS to cluster (proxied A record)	A proxied `A` record for the dashboard host, pointing at the server’s IP. Nothing for services.	Nothing for Cloudflare.
Cloudflare Tunnel	A tunnel named `geass`, its routes, and a proxied `CNAME` to `<tunnel ID>.cfargotunnel.com` for the dashboard host and for each service host in the zone.	Deployment `geass-cloudflared` and Secret `geass-cloudflared-token` in `geass-system`.

The token needs Zone → Zone → Read and Zone → DNS → Edit, and Account → Cloudflare Tunnel → Edit for tunnel mode. See Connect Cloudflare for connecting, rotating and disconnecting.

Zone discovery. When you paste a token, Geass lists the zones it can read. With one zone it picks it. With several, you choose, and the choice is stored. The root domain you save should be the zone you chose, because that is the only zone Geass writes in. Refresh zones on the Cloudflare card re-reads the list.

When the tunnel is synced. In tunnel mode Geass works out the routes and DNS records from the dashboard host and from every service that has a host, and sends them to Cloudflare when that set changes: when a service gets, changes or loses a host, or when you change the domain or the token. When nothing changed it sends nothing and looks again every 5 minutes, which repairs a route or a record that someone deleted in Cloudflare. While the dashboard domain is not verified, the operator looks again every 5 seconds. The route of a service that sleeps when idle points at the scale-to-zero proxy and not at the service, so a request through the tunnel wakes it.

What it does not do. Geass does not create records for services in DNS to cluster mode, does not change SSL/TLS modes, and does not delete records or the tunnel when you disconnect.

Default hostnames

When Cloudflare is connected and ready and a service has no hostname, Geass gives it one:

<service ID>-<project ID>.<root domain>
<service ID>-<project ID>-<environment>.<root domain>     (environments other than production)

For example, amber-fern-proj-1a2b3c4d.example.com and amber-fern-proj-1a2b3c4d-staging.example.com. Geass fills it in the next time it reconciles the service, including drafts, and saves it as the service’s Custom domain with HTTPS off. The displayed address therefore starts with http:// even when Cloudflare serves it over HTTPS. If you clear the field while Cloudflare is connected, Geass fills it in again.

Without Cloudflare, services get no default hostname. A default hostname is a host like any other, so it also lets a service sleep when idle, which needs one.

In tunnel mode Geass creates the DNS record and route for it. In DNS to cluster mode it does not, so a record must exist, for example a wildcard *.example.com pointing at the server, which covers these one-label names.

Give a service a domain

Create the DNS record: shop.example.com → 203.0.113.10 (type A), or let Cloudflare do it in tunnel mode.
Open the service, then Settings → Networking, and type the name in Custom domain: the hostname only, in lowercase, with no https:// and no path. Choose Save changes. It applies at once.
Open http://shop.example.com/.
For HTTPS, check that the cluster has an issuer (above) and that the DNS record from step 1 resolves, then turn on HTTPS and choose Save changes. Check https://shop.example.com/ once the certificate is issued. Follow it with kubectl -n <namespace> describe certificate <service ID>-tls.

The Ingress is created when the service is deployed, so a draft shows a domain but serves nothing until you deploy. Under the fields, Public networking shows the address and a hint such as “Routed through the cluster ingress”.

Verify DNS. Turn it on and Geass resolves the hostname when it reconciles the service, within 2 seconds, and records whether it resolved. If it did not, the line under the address reads “DNS hostname is required”, whatever the cause. The check accepts any answer, so it does not prove the name points at this cluster. It does not stop traffic and does not change the service’s status, even though the form says it checks “before reporting the domain as ready”. Geass does not poll: it runs again the next time the service is reconciled.

Paths and several hosts. The dashboard form takes one host and serves it at /. The GeassApp also accepts spec.ingress.path, and spec.ingress.rules for several host and path pairs. See Apps. In tunnel mode only spec.ingress.host with spec.ingress.path is added to the tunnel’s routes and DNS. A host that is only in rules reaches the service through Traefik, and so needs its own record.

Sleeping services. A service that sleeps when idle needs a host, because the requests to it wake it. Its Ingress sends traffic to the Service <service ID>-wake, a name for the scale-to-zero proxy, and not to the service itself.

What happens under the hood

Object	Where	Purpose
`GeassPlatformConfig` `platform`	`geass-system`	`spec.rootDomain`, `spec.dashboardURL`, `spec.dashboardExposure`, `spec.cloudflareZoneID`, and the conditions above.
Ingress `geass-dashboard`	`geass-system`	The dashboard route (not in tunnel mode).
Ingress `<service ID>`	`<project ID>-<environment>`	A service’s route, when it has a host. For a service that sleeps when idle, its backend is the Service `<service ID>-wake`.
Secret `geass-dashboard-tls`, `<service ID>-tls`	Same as the Ingress	The certificate, once issued.
Deployment `geass-cloudflared`	`geass-system`	The tunnel connector (tunnel mode).
`ClusterIssuer` `letsencrypt-prod`	cluster-wide	The issuer every certificate is requested from. Geass creates it when the cluster has an ACME email.
Condition `ClusterIssuerReady`	On the `GeassCluster`	Whether certificates can be issued.

kubectl get pods -n cert-manager
kubectl get clusterissuer letsencrypt-prod
kubectl -n geass-system get geasscluster default -o jsonpath='{.status.conditions[?(@.type=="ClusterIssuerReady")].message}{"\n"}'
kubectl get certificate,order,challenge -A
kubectl -n geass-system describe ingress geass-dashboard
kubectl -n proj-1a2b3c4d-production get ingress amber-fern -o yaml
kubectl -n geass-system get geassplatformconfig platform -o yaml

Troubleshooting

The “Dashboard domain” banner never goes away. The domain is not verified. Read the condition reason (see above). Usual causes: the DNS record is missing or points at another server, no certificate (the cluster has no ACME email, so Geass created no letsencrypt-prod issuer), or a port is closed. Settings → Domain does not show the status. The banner does not show inside a project.

PendingDNS with “DNS not detected yet”. The host does not resolve to the server’s public IP from inside the cluster. Check the record with dig +short geass.example.com. In tunnel mode the message means the host’s CNAME does not point at the tunnel yet. (When Geass manages the record through Cloudflare it does not compare IP addresses, so a proxied record that resolves to Cloudflare’s addresses is fine.)

PendingHTTPS, or “could not reach the dashboard URL”. DNS is right but the HTTPS probe fails. Check that ports 80 and 443 reach the server, that kubectl get clusterissuer letsencrypt-prod finds an issuer, and kubectl get certificate -n geass-system. The message after PendingHTTPS often names the issuer problem. A certificate that is not Ready is why: kubectl describe certificate geass-dashboard-tls -n geass-system and the challenge objects say why. With Cloudflare in front, also check the zone’s SSL/TLS mode.

“Dashboard responds locally, but the public URL could not be reached.” The operator is fine. The public path (DNS, ports, Ingress, certificate or Cloudflare) is not.

ZoneRequired. The token sees more than one zone. Pick one under Customize zone or subdomain.

The browser warns about the certificate, or shows “TRAEFIK DEFAULT CERT”. There is no issued certificate. Check ClusterIssuerReady first, then kubectl get certificate -A. A certificate that stays False usually means DNS did not point at the server, or port 80 was closed, when cert-manager tried.

ClusterIssuerReady says ACMEEmailMissing. The cluster has no contact email, so Geass created no issuer. Set spec.addons.certManager.acmeEmail (see HTTPS and certificates).

ClusterIssuerReady says IssuerNotReady. cert-manager could not register the Let’s Encrypt account. The message carries its reason. The usual cause is an email at a domain Let’s Encrypt refuses, such as example.com. Set a real address.

kubectl get certificate -A shows nothing. cert-manager did not act on the Ingress. The issuer is missing (the cert-manager log complains that the issuer is not found), the add-on is off, or the Ingress has HTTPS off.

A service domain returns 404 page not found. Traefik has no route for that name. The service is not deployed yet, the Custom domain has more than the hostname, or the name reaches another server. Check kubectl -n <namespace> get ingress.

502 or 503 on a service domain. The route exists but no pod answers. See Apps.

A default hostname does not resolve. In DNS to cluster mode Geass does not create records for services. Add one, or a wildcard, or switch to Cloudflare Tunnel.

Cloudflare shows a 5xx error page for a service. Geass does not manage your zone’s SSL/TLS mode. Set it so Cloudflare reaches your server over HTTPS, make sure the origin has a certificate if the mode requires a valid one, or use the tunnel.

I changed the root domain and the dashboard stopped working. The old Ingress is replaced with the new host, but DNS and the certificate must follow. Verification starts again. Keep the old record until the new address works.